Refractory material solution for glass furnace
Horizontal flame glass kiln, also
named float glass kiln, is most widely used kiln in current glass industry.
Another type is vertical flame glass kiln also named horseshoe kiln.
Requirements of refractories are various and decided by the furnace working condition and actual atmosphere. But they should character with these features: high temperature resistance, good chemical stability and anti-corrosion, thermal shock resistance, volume stability, mechanical strength.
SIJIHUO REFRACTORY can supply all
related refractory brick for glass kiln, involving Fused Cast AZS, Fused Cast
a-b Alumina Jargal, Fused Cast b Alumina Jargal, Zirconia, Zirconia-Mullite,
Silicon oxide brick, Sillimanite brick, fireclay brick or chamotte refractory bricks,
refractory mortar, AZS ramming mixes etc.,
Refractories recommendation for Glass kiln lining
AZS (Alumina Zirconia Silica) is necessary and the most important refractory material for glass furnace.
To a certain extent, refractory quality influences the glass quality, energy consumption, furnace service life and glass production cost. Thus, it’s quite important to apply for suitable and good quality refractory bricks during glass furnace installing.
| Casting Type |
Ref. |
Description |
Density |
Application |
| PT |
RC |
Ordinary casting type, Shrinkage hole in the product bottom |
≥3.40 |
Small furnace top
Working pool
Feeding channel
Non-glass contact zone |
| QX |
TC |
Tilting casting type, Shrinkage hole in the product lower part |
≥3.40 |
Pool wall |
| ZWS |
TC |
Similar with WS, by cutting all part of shrinkage hole |
≥3.60 |
Pool wall |
| WS |
VF |
No shrinkage hole, by cutting casting brick shrinkage hole part |
≥3.70 |
Side wall
|
| Casting Type |
Ref. |
Description |
Density |
Application |
| PT |
RC |
Ordinary casting type, Shrinkage hole in the product bottom |
≥3.50 |
Small furnace top
Working pool
Feeding channel
Non-glass contact zone |
| QX |
TC |
Tilting casting type, Shrinkage hole in the product lower part |
≥3.50 |
Pool wall |
| ZWS |
TC |
Similar with WS, by cutting all part of shrinkage hole |
≥3.70 |
Pool wall, bottom, special shape |
| WS |
VF |
No shrinkage hole, by cutting casting brick shrinkage hole part |
≥3.80 |
Pool wall |
| Casting Type |
Ref. |
Description |
Density |
Application |
| WS |
RC |
No shrinkage hole, by cutting casting brick shrinkage hole part |
≥3.85 |
Pool wall
|
| ZWS |
TC |
Similar with WS, by cutting all part of shrinkage hole |
≥3.90 |
Pool wall, Fluid hole, Feeding corner, special shape |
